Instructions

Step 1

Clean screen carefully with spray solution provided. Be sure to remove any residual dirt or oil as they can affect film adherence. 

Step 2

Wet fingers with water and peel off adhesive backer (opaque layer). 

Step 3

Spray screen with supplied solution, then carefully align the. screen protector with your device's screen and slowly place it down. 

Step 4

With squeegee provided, squeegee from the center diagonally towards each corner to drive the moisture out between the material and device. 

You're done!

Note: allow device to cure and all remaining bubbles to dissipate after 24 hours.